Disainilahendus Automatic Saagikoristusrobot, autor Denso Corporation

Disainilahendus Automatic Saagikoristusrobot, mille autor on Denso Corporation, on kõrgelt hinnatud 2024 auhinna Plaatinaauhind A' Design Award võitja konkursi kategoorias Robootika, automaatide ja automatiseerimise disain.

PlaatinaRobootika· 2024

Automatic Saagikoristusrobot

disainer: Denso Corporation

Klient: Denso Corporation

Auhind Plaatinaauhind A' Design Award kategoorias Robootika

1,762,206

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #145369

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Automatic Saagikoristusrobot

Automatic on saagikoristusrobot, mis on loodud suuremahulistele aiandusrajatistele. Automatic liigub mööda kasvuhoonesse paigaldatud rööpaid ning kasutab kaameraid ja andureid, et hinnata, millised kirsstomatid on küpsed. Väljasirutuv käsi lõikab terved kobarad ja asetab need järelveetavasse kasti. Töö saab jätkuda ka öösel, mis leevendab tööjõupuudust saagikoristuse tippperioodidel. Ümarad pinnad ja pärlmutterviimistlus pehmendavad välisilmet ning igast vaatenurgast nähtavad indikaatorsilmad näitavad liikumissuunda. Takistused tuvastatakse, nii et masin peatub ohutult.

Tunnustus

Auhinnast Plaatinaauhind A' Design Award

Automatic Saagikoristusrobot on Plaatinaauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tõeliselt erakordsetele, elegantsetele ja suurepärastele disainidele. Plaatinavõitjad on loomingu imed, tunnistused intellektuaalse loovuse piiridest ning näitavad oma disainerite võrreldamatut professionaalsust ja geniaalsust. Nendelt disainidelt oodatakse, et need on kõige tuntumad tööd, mis määratlevad ajastu esteetika, panustavad ühiskonna heaolusse ning nihutavad kunsti, teaduse, disaini ja tehnoloogia piire. Automatic Saagikoristusrobot väljendab transtsendentset tipptaset ning teeb maailma ühemõtteliselt paremaks oma kasulike ja väärtuslike omadustega. Automatic Saagikoristusrobot on Plaatinaauhinna A' Design Award võidutöö, mis äratab soove, inspireerib, erutab, rõõmustab ja sütitab suurt rõõmu.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: With a declining number of farmers worldwide, time-consuming harvesting is one area to save manpower. That is why we designed this robot to offer peace of mind when interacting with it. It features eyes that can be seen from any angle, indicating its travel direction and giving it a friendly image while its rounded top surface and pearlescent finish make it unintimidating. Its system allows it to detect obstacles and stop safely, and its top surface is free of bumps where dirt can accumulate.
Mõõtmed ja pakend: 1230mm×1320mm×930mm
(not including cutters, cables)
Chassis weight 300 kg
Sildid: automated harvesting, robot, AgriD, cherry tomato, horticulture facility, DENSO, DENSO Design
Tootmistehnoloogia: A new level of harvesting technology has been reached via DENSO's unique image processing and robot hand technology.
1. A modular configuration was used for high versatility and to ensure cost reduction and a low barrier to entry.
2. For cleanliness, the top surface has as few recesses for water or dirt to collect as possible and cables are not exposed.
3. To ensure people can work safely with the robot, it features status indicator lights and has a system to detect obstacles and stop safely.
Disainiülesanne: In its early development the robot was angular in shape due to its internal mechanisms and complicated wiring. This combined with its large body size gave it less-than-friendly impression. To create one, we began with the internals, trying to devise a frame layout to achieve a rounded shape while maintaining functionality, and to configure the parts to reduce volume. Also, to facilitate human-robot communication, we designed indicator lights to be visible, so that they would meet peoples' eyes.
Uurimistöö: Denso's goal is to integrate the entire greenhouse process into a system allowing people to do the work best suited to them, while machines do the work best suited to machines, providing local farmers with a lively workplace.
The system uses cameras and AI technology to detect bunches, judge ripeness and automatically harvest.
Replacing some of the work done by people with machines during peak harvest times reduces the burden on workers so they can work efficiently and not overtax themselves.
Inspiratsioon: The world population is set to exceed 10 billion by 2050, bringing an increased demand for food. Food shortages will likely intensify in places with growing populations like Asia and Africa, as some areas are not suitable for agriculture. Japan and other developed countries are facing problems like fewer agricultural workers due to an aging and declining population and widespread food waste. By solving these, DENSO's goal is to reform the entire food value chain toward a sustainable society.
Projekti kestus: Design development fully underway in March, 2019.
News released in March, 2020.
Demonstration unit begins operation at AgriD in Inabe City, Mie Prefecture, Japan
Tööprotsess: This robot harvests cherry tomatoes for large-scale horticultural facilities. It moves automatically along rails laid out in a path on the farm and uses cameras and sensors to which cherry tomatoes are ripe for harvesting. The robot's arm can extend and cut off an entire bunch of tomatoes, which is then placed in a box pulled by the robot. It can even work at night when no one is around, contributing to labor savings, addressing labor shortages, and increasing harvest volume.
Meeskonnaliikmed: Producer:
Hideyuki Nishino, Food Value Chain Business Development Division
Go Handa, Production Eng. Division
Director:
Takaomi Hasegawa, Food Value Chain Business Development Division
Tomoki Ikoma, Design Division
Yuji Kawahara, Mobility Electronics R&D Division
Designer:
Seisho Inada, Food Value Chain Business Development Division
Hiromu Arihara, Production Eng. Division
Yuko Kanda, Jihye Kim, Design Division
Piltide autorid: Image #1:Designer Yuko Kanda, 2020, Design Division, DENSO CORPORATION / Image #2-#5:2020,Public Relations Division, DENSO CORPORATION