Disainilahendus QR Coder Elektrooniline Tempel, autor Zongyue Yang

Disainilahendus QR Coder Elektrooniline Tempel, mille autor on Zongyue Yang, on kõrgelt hinnatud 2021 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias Kunsti- ja kontoritarvete disain.

RaudKunstitarbed· 2021

QR Coder Elektrooniline Tempel

disainer: Zongyue Yang

Klient: Bruce Tao

Auhind Rauaauhind A' Design Award kategoorias Kunstitarbed

28,926

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #119984

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest QR Coder Elektrooniline Tempel

QR Coder on elektrooniline tempel, mis loob QR-koode. Disain ühendab traditsioonilise pitsati QR-koodiga, mis suudab kanda suurel hulgal teavet. QR Coder loob ülemise lüliti pikal vajutamisel Bluetoothi kaudu ühenduse mobiiltelefoniga. Soovitud kood koostatakse telefonis ja saadetakse templile, kus muster moodustatakse aluspinnal. Korpus on valmistatud ABS-plastist, mis on löögikindel, kriimustuskindel, niiskuskindel ja aeglaselt soojust juhtiv materjal. QR Coderi mõõtmed on 2 x 2 x 5 sentimeetrit.

Tunnustus

Auhinnast Rauaauhind A' Design Award

QR Coder Elektrooniline Tempel on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. QR Coder Elektrooniline Tempel peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. QR Coder Elektrooniline Tempel on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The most distinctive feature of this product is that it is an electronic QR code seal. It was inspired by traditional seals and QR codes. With the application of two-dimensional code more and more scenarios, and two-dimensional code can carry more information characteristics. This project is combined these features to create this design.
Mõõtmed ja pakend: length 2cm x Width 2cm x Height 5cm
Sildid: Stamp, QR code, Convenience, Stationery, Bluetooth, Modern
Tootmistehnoloogia: Its base is made of ABS, and the heat conduction is slow enough to keep the user from feeling cold. ABS material has strong impact resistance, scratch resistance, dimensional stability, and other characteristics, at the same time both moisture-proof, corrosion resistance, easy processing, and other characteristics. ABS material is also very environmental protection, because of the use of environmental chemicals, so there is no toxicity and no smell, but also to electrical insulation, is a very safe material.
Disainiülesanne: This is an innovative design with a complex internal structure, and the machining qualification rate is the biggest challenge encountered by this project.
Uurimistöö: QR code has the characteristics of large storage, high confidentiality, high tracking, strong damage resistance, large backup, low cost and so on. These characteristics are especially suitable for forms, security and confidentiality, tracking, license, inventory, data backup, etc. With the increasing application of two-dimensional code, the market of two-dimensional code peripheral products is also growing.
Inspiratsioon: We got our inspiration from QR codes. QR coder is widely used in modern life. Our motivation was to look for other scenarios where QR codes could be used. We combine the two-dimensional code and the seal together, and realize the two-dimensional code seal through connecting Bluetooth.
Projekti kestus: The project started in September 2020 in Milan and finished in February 2021 in that place, and was exhibited in China in February 2021.
Tööprotsess: Long press the top switch when using it, and QR coder can connect to the mobile phone through Bluetooth. Edit the required QR code on the mobile phone, and then send the information to QR coder through Bluetooth function. The bottom of it generates a QR code like this. Finally, open the seal box and press QR coder forcefully to seal the two-dimensional code.
Meeskonnaliikmed: Design leader: Qi Wang, Designer: Ziqi Shao
Piltide autorid: Creator (Bruce Tao / Designer)