Disainilahendus Mira Tool, mille autor on Cemil Yavuz, on kõrgelt hinnatud 2021 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias Mööblidisain.
RaudMööbel· 2021
Mira Tool
disainer: Cemil Yavuz
Klient: Cemil Yavuz
Auhind Rauaauhind A' Design Award kategoorias Mööbel
Kinnitatud auhinna võitja
Kinnita auhinna staatus disainile #116467Disain
Teosest Mira Tool
Mira on tool, mis on loodud söögilaua ääres ja üldiseks istumiseks kasutamiseks. Raam on valmistatud kolmest ümarast roostevabast terasprofiilist. Kaks profiili on painutatud sama nurga all ja samas suunas, kolmas aga teistmoodi. Kangaga kaetud istme- ja seljatoepinnad on kinnitatud raami külge ning kõrguse osas reguleeritavad plastjalad annavad toolile lõpliku vormi. Mira on kergekaaluline ja seda saab paigutada nii laua ümber kui ka eraldiseisvana. Tooli saab kasutada nii vasakule kui paremale kaldu olles. Mira tarnitakse lahtivõetuna, nii et kasutajad saavad tooli pärast lahtipakkimist ise kokku panna.
Tunnustus
Auhinnast Rauaauhind A' Design Award
Mira Tool on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. Mira Tool peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. Mira Tool on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.
Disaini taustal
Pressimaterjalid
Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.
- Unikaalsed omadused
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Mõõtmed ja pakend
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Sildid
- Bending, Metal Profile, Chair, Simple, Elegant
- Tootmistehnoloogia
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Disainiülesanne
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Uurimistöö
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Inspiratsioon
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Projekti kestus
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Tööprotsess
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
Sponsoreeritud
Avasta rohkem kui Designers.org
Avasta tooteid, teenuseid ja võimalusi meie reklaamipartneritelt.
Avasta rohkem
Seotud disainid
Avasta rohkem auhinnatud disaine samast kategooriast, valitud kvaliteedi alusel.
