Disainilahendus EnGo Akukorpus, autor Vladimir Zagorac

Disainilahendus EnGo Akukorpus, mille autor on Vladimir Zagorac, on kõrgelt hinnatud 2022 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Energiatoodete, -projektide ja -seadmete disain.

PronksEnergia· 2022

EnGo Akukorpus

disainer: Vladimir Zagorac

Klient: EnGo Planet

Auhind Pronksauhind A' Design Award kategoorias Energia

31,509

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #108261

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest EnGo Akukorpus

EnGo on kaasaskantav akukorpus, mis on mõeldud kasutamiseks 12V ja 24V päikeseenergial töötavates tänavavalgustites, nutipinkides ja teistes energiaseadmetes. Kompaktne korpus mahub ühte kätte ja seda saab virnastada mitmes suunas, võimaldades juhtmetel ja pistikutel kulgeda seadmete vahel. Eemaldatav käepide muudab kandmise ja paigutamise lihtsamaks ning saab hoiustada korpuse sees, kui seda ei kasutata. Klemmikorke saab pingutada käsitsi või kuuskantvõtmega. Töörežiimi ja aku mahtuvust saab jälgida nutitelefoni kaudu Bluetoothi abil. Korpus on valmistatud survevalatud polümeerist.

Tunnustus

Auhinnast Pronksauhind A' Design Award

EnGo Akukorpus on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. EnGo Akukorpus peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. EnGo Akukorpus rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The battery case is minimalistic and contemporary, portable, and fits in one hand, stackable, easily operated, and customizable. The design implements large radii and beveled edges to maximally save space, allowing the cables and connectors to fall between the cases. The cooling opening accepts a detachable multifunctional handle. The battery terminal caps can be tightened by both a hand and an Allen key. The operation and battery capacity can be monitored by a smartphone via Bluetooth.
Mõõtmed ja pakend: Height: 310mm, Width: 125mm, Depth: 68mm (without the handle)
Sildid: Smart Battery, Power Bank, Portable, Stackable, Multifunctional, Customizable
Tootmistehnoloogia: Injection-molded polymer, bent chrome-plated rod
Disainiülesanne: Intended multifunctionality required the handle to be used to carry and lower or pull up the battery in or out of position in large sets. The solution is flexible and can easily be inserted into the carrying position, held in place by outward-bent ends. It can be removed or slipped safely inside the housing when not in use and can carry two units at the same time if needed. Safe stackability was achieved through two pairs of recesses on the upper side, one pair being the terminal cap recesses.
Uurimistöö: The case was planned for 12V & 24V solar light poles and Smart benches, as well as an individual product, but also for differently orientable sets within high-end solutions of other manufacturers, like power wall and power bank products, electric vehicles, yachts, etc. For that reason, the positions of the terminals are customizable during production to fit the product's intention or depending on the type of set, also enabling easier connection and usage of cables of short or uniform length.
Inspiratsioon: The design project was initiated after lithium was found in a deposit in Serbia. Among battery-operated products are EnGo Planet solutions, so it was expected that the company would invest in the development of housings for lithium-based batteries. The end product would be used in the company's solar solutions or marketed separately for other usages.
Projekti kestus: The project lasted several weeks and took place in Belgrade, Serbia.
Tööprotsess: One unit is a portable smart battery, while a set can be oriented in several ways for different usages in other products. Rotating a case can pair up a set into a hexagonal vertical composition suitable for placement inside a light pole. A large number of units can be stacked into a rectangular composition for other usages, allowing cables of up to 10mm in diameter to be routed horizontally, and MC4 solar connectors 19mm in diameter to be routed vertically between the units.
Piltide autorid: Vladimir Zagorac