Disainilahendus Arch Tool, seljatoetuseta iste, mille autor on Edvard Glazebrook, on kõrgelt hinnatud 2021 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Mööblidisain.
PronksMööbel· 2021
Arch Tool, seljatoetuseta iste
disainer: Edvard Glazebrook
Auhind Pronksauhind A' Design Award kategoorias Mööbel
Kinnitatud auhinna võitja
Kinnita auhinna staatus disainile #106853Disain
Teosest Arch Tool, seljatoetuseta iste
Arch on tool ja seljatoetuseta iste, mis on valmistatud freesitud ja mustaks peitsitud laminaatpuidust männipuidust. Disain põhineb lihtsatel ja korduvatel vormidel ning kujunditel, mis annavad mööblile ühtse ja loogilise väljenduse. Viis identset kaart moodustavad tooli jalad ja seljatoe, seljatoetuseta iste aga koosneb kolmest poolkaarest, mis kohtuvad keskel. Kõik osad on lõigatud laminaatpuidust plaadist CNC-freesiga, seejärel liimitud ja ühendatud puidust tüüblitega. Kaarekujulised jooned tugevdavad mööblit selle nõrgimates punktides.
Tunnustus
Auhinnast Pronksauhind A' Design Award
Arch Tool, seljatoetuseta iste on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Arch Tool, seljatoetuseta iste peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Arch Tool, seljatoetuseta iste rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.
Disaini taustal
Pressimaterjalid
Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.
- Unikaalsed omadused
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Mõõtmed ja pakend
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Sildid
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Tootmistehnoloogia
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Disainiülesanne
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Uurimistöö
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspiratsioon
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Projekti kestus
- The project started in march 2020 - and finished in late May 2020.
- Tööprotsess
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patendid
- Copyrights belong to Edvard Glazebrook, 2020
- Meeskonnaliikmed
- Edvard Glazebrook
Sponsoreeritud
Avasta rohkem kui Designers.org
Avasta tooteid, teenuseid ja võimalusi meie reklaamipartneritelt.
Avasta rohkem
Seotud disainid
Avasta rohkem auhinnatud disaine samast kategooriast, valitud kvaliteedi alusel.
