Disainilahendus Thermacut Peamine funktsioon: Plasmapõleti, autor David Polasek

Disainilahendus Thermacut Peamine funktsioon: Plasmapõleti, mille autor on David Polasek, on kõrgelt hinnatud 2021 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Riistvara, elektri- ja käsitööriistade disain.

PronksRiistvara· 2021

Thermacut Peamine funktsioon: Plasmapõleti

disainer: David Polasek

Klient: Novo Design

Auhind Pronksauhind A' Design Award kategoorias Riistvara

48,158

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #106220

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Thermacut Peamine funktsioon: Plasmapõleti

Raamatu tekst: Thermacut on metalli lõikamiseks mõeldud plasmapõleti. Põleti on osa plasmalõikussüsteemist, mis kasutab gaasi ja elektrit, et tekitada 20000-kraadine leek, lõigates terast kuni 40 millimeetri paksuselt. Ergonoomiline käepide võimaldab mitmeid hoiuasendeid. Põletit saab hoida suletud rusikaga ümber käepideme või pöidlaga käepideme peal toetudes. Turvapäästik takistab tahtmatut käivitumist. Korpuse põhiosa on valmistatud plastist survevalu meetodil ning ülejäänud osad vasest, messingist, terasest, keraamikast ja kummist.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Thermacut Peamine funktsioon: Plasmapõleti on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Thermacut Peamine funktsioon: Plasmapõleti peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Thermacut Peamine funktsioon: Plasmapõleti rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: Thermacut plasma torch brings new design of handle for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000 celsius degree to cut metal materials up to 40mm thick. The handle includes safety trigger and offers multiple ways of holding for plasma operators. You can hold device with closed palm around handle or with the thumb on the top of the handle.
Mõõtmed ja pakend: Width 256mm x Depth 39mm x Height 148mm
Sildid: Thermacut, Extrafire, Plasma, Torch, Cutting, Metal, Handle, Ergonomics
Tootmistehnoloogia: Plasma torch consists from metal technology parts which are made of copper, grass and steel. Main case is made of plastic using injection molding technology for mass production. Another parts are made of ceramic, rubber, etc.
Disainiülesanne: The bigger challenge of whole development process was the fusion of design styling and technology inside that device. We tried to find optimal solution how to connect well looking product with perfect ergonomic feature and production quality. Another challenge was fitting all technology parts into tight plastic case.
Uurimistöö: The plasma torch Thermacut is product by worldwide producer of plasma cutting systems for manufacturing industry with more than 25 years experience in this industry. Thermacut Extrafire brings new design of handle construction for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000°C. Plastic handle is a shell for plasma cutting torch assembly that carries plasma consumables. Handle with torch body is connected with plasma power supply that delivers current for torch operation. This torch and handle is designed for air cutting applications and works up to 105Amp cutting steel materials up to 40mm thick. Ergonomic handle offers multiple ways of holding for plasma operators. The operator can hold torch ordinarily with closed palm around handle or with the thumb on the top of the handle using special thumb rest spot as support for better leading the torch during cutting process. The handle includes safety trigger to turn the torch on only when operator wants and can not cause injury of operator.
Inspiratsioon: New product design comes from previous series partly and brings new attitude of dynamic ergonomic construction. Body shape with new proportion is more comfortable to hold and opperate during work process. The handle offers more options how to hold device in hand due to organic form and rigorously defined grip fields.
Projekti kestus: The project development of technology and design started in December 2015 in Zlin district in Czech Republic and finished in May 2020 in Czech Republic.
Tööprotsess: Plasma torch uses high temperature flame to cut steel and another metal materials up to 40mm thick. Due to ergonomic handle it is easy and comfy to operate this device safely and correctly. 20.000 celsius degree flame comes into being via ionization of gas nad electricity. Plasma cutting is used in industry mainly, but is available for home improvements and work as well.
Patendid: Copyright 2020, David Polasek - Novo Design & Thermacut k.s. company, Czech Republic.
Meeskonnaliikmed: R&D Engineer: Zdeněk Lapčík, R&D Engineer: Tomáš Kusák
Piltide autorid: Image 1: Creator (designer) David Polasek, Image 2: Creator (designer) David Polasek, Image 3: Creator (designer) David Polasek, Image 4: Creator (designer) David Polasek, Image 5: Creator (designer) David Polasek