Repose Sillón de descanso de John G Williams

El diseño Repose Sillón de descanso de John G Williams es un ganador altamente estimado del prestigioso 2019 A' Design Award de Hierro en la categoría de competición Diseño de Mobiliario.

HierroMobiliario· 2019

Repose Sillón de descanso

de John G Williams

Cliente: John G Williams Fine Furniture

Ganador del A' Design Award de Hierro en la Categoría Mobiliario

14,013

Ganador de Premio Verificado

Verificar Estado del Premio para #75298

Visitar Sitio Ver en A' Design Award Nota de Prensa Insignia del Premio

Colores

El Diseño

Acerca de Repose Sillón de descanso

Repose es un sillón de descanso fabricado en madera maciza noble. La estructura es de fresno americano, y el asiento y el respaldo son de nogal americano. El profundo asiento curvo se forma laminando piezas de madera perfiladas con cantos en ángulo, una versión extrema del método de duelas empleado para construir barriles. Las curvas interiores se mecanizan hasta lograr un acabado liso mediante herramientas a medida, mientras que la parte superior de los brazos conserva una textura segmentada. Las patas traseras se curvan al vapor y contribuyen a estabilizar los brazos. Las uniones de espiga con clavija desalineada (draw bore) aportan resistencia. El objetivo era alcanzar el confort de una butaca tapizada empleando únicamente madera maciza.

El Reconocimiento

Acerca del A' Design Award de Hierro

Repose Sillón de descanso ha ganado el A' Design Award de Hierro, un reconocimiento prestigioso concedido a buenos diseños que cumplen los requisitos profesionales e industriales que se esperan de creaciones bien diseñadas. Los ganadores de Hierro demuestran gran habilidad, alta especialización, comprensión experta y capacidad creativa de sus creadores. Se espera que Repose Sillón de descanso sea una creación muy apreciada, admirada y querida, práctica e innovadora. Este diseño ganador del A' Design Award de Hierro integra las mejores prácticas del sector y tiene características técnicas competentes unidas a conocimiento práctico y talento. Repose Sillón de descanso es respetado por su minuciosidad y está concebido para aportar mejoras en la calidad de vida que ayudan a hacer del mundo un lugar mejor.

Detrás del Diseño

Kit de Prensa

Créditos, miembros del equipo y detalles técnicos proporcionados por el diseñador.

Propiedades Únicas: The Repose lounge chair is constructed from solid timber. The curved form is realized by an extreme form of the 'coopering' process - similar to the process used to construct round barrels from staves of timber.
Dimensiones y Embalaje: W 800, D 800, H 830 mm
Constructed from solid hardwood timber. Frame: American Ash. Seat and Back: American Walnut.
Joints use draw bore tenon joints for extra strength
Etiquetas: Lounge, chair, wooden, artisanal, Danish, timber, art
Tecnología de Producción: This chair is not moulded, as some might expect, but is formed from solid timber. The deep sweeping form of the seat is made by laminating various pieces of timber, with angled edges, to form the desired curves. The inside curves are machined into smooth curves with custom made tooling; but the arm uppers retain some of the segmented feel - smooth enough and yet conveying a sense of where the piece came from. The rear legs are steam bent, to retain the overall simplicity, and to attenuate and stabilize the top part of the chair arms. The backrest is also a curved laminated, solid-wood form. It would also be possible to add a thin seat cushion, or perhaps to re-conceive the entire backrest as a custom moulded leather cushion
Desafío de Diseño: The major unknown was how strong the seat section would be in bending - in other words if someone sat on the arms, would they break? It became apparent that the arms would need additional support given the depth of the form, and the inevitable flexibility (despite steps taken to add strength in the manufacturing process). It was found that the support pins at the rear of the arms were sufficient to stabilize the entire form - which was confirmed through trial and error.
Overall the challenge was to create a lounge chair that, despite being solid timber, would be as comfortable as an upholstered equivalent
Investigación: The method drew heavily on the methods used in earlier designs (eg Zene submitted last year), but took these to extremes to experiment with the art of the possible.
New tooling was developed, in the form of a type of drum sander run between centres on a woodworking lathe, to machine the large concave curves
Inspiración: The inspirational question behind Repose was: if the design language at the core of the Beke and Zene dining ranges were extended to lounge furniture, what would that look like? Could a form be created out of beautiful solid hardwood timber that was profoundly comfortable even though it may be challenging to manufacture? Could some sort of modern shell design be crafted out of solid timber to yield a beautiful striking new design ?
Duración del Proyecto: The project was designed and the first prototype built in 4 weeks, starting Dec 2018 and completing in Jan 2019 in Johannesburg South Africa. The design was refined and built in finished materials (Ash and Walnut) over the following 4 weeks.
Flujo de Operación: The user settles comfortably down into the seat using the armrests.
Various postures are supported sitting comfortably down in the seat.
Getting back out of the seat is very easy, and facilitated by the arms.
Patentes: UK IPO design registration: 6053688
Miembros del Equipo: John G Williams
Créditos de Imagen: All images: John G Williams