C3 Sterilization Fregadero de cocina de Nuomi

El diseño C3 Sterilization Fregadero de cocina de Nuomi es un ganador altamente estimado del prestigioso 2025 A' Design Award de Plata en la categoría de competición Diseño de Mobiliario de Cocina.

PlataMobiliario de Cocina· 2025

C3 Sterilization Fregadero de cocina

de Nuomi

Cliente: Guangdong Nuomi Home Intelligent Technology Co.,Ltd

Ganador del A' Design Award de Plata en la Categoría Mobiliario de Cocina

48,693

Ganador de Premio Verificado

Verificar Estado del Premio para #172108

Ver en A' Design Award Nota de Prensa Insignia del Premio

Colores

El Diseño

Acerca de C3 Sterilization Fregadero de cocina

C3 Sterilization es un fregadero de cocina con cuidado integrado de la tabla de cortar. Un compartimento incorporado emplea luz ultravioleta y circulación de aire caliente para esterilizar y secar una tabla de cortar en 15 minutos. El proceso de cuidado se inicia automáticamente al colocar la tabla en su interior, y una tira luminosa con sensor indica el estado de funcionamiento. Las paredes interiores cuentan con un recubrimiento nanohidrofóbico que aporta resistencia a los arañazos y capacidad de autolimpieza, y la tubería de desagüe incorpora una capa antibacteriana de iones de plata. Un diseño de almacenamiento vertical con soporte magnético para cuchillos permite ahorrar espacio en cocinas reducidas.

El Reconocimiento

Acerca del A' Design Award de Plata

C3 Sterilization Fregadero de cocina ha ganado el A' Design Award de Plata, un reconocimiento extraordinariamente prestigioso concedido a diseños de gama alta, magníficos e impresionantes. Los ganadores de Plata son obras tremendamente brillantes y sumamente creativas que ilustran la destacada experiencia, el talento y la agudeza de sus diseñadores. Se espera que C3 Sterilization Fregadero de cocina sea una obra maravillosa y emblemática, notablemente profesional y profundamente innovadora. Este diseño ganador del A' Design Award de Plata es una invención muy notable y admirada que beneficia y hace avanzar las fronteras del arte, la ciencia, el diseño y la tecnología. C3 Sterilization Fregadero de cocina es una creación enormemente envidiada que evoca deseos, aporta sentimientos positivos y despierta asombro y admiración.

Detrás del Diseño

Kit de Prensa

Créditos, miembros del equipo y detalles técnicos proporcionados por el diseñador.

Propiedades Únicas: The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
Dimensiones y Embalaje: 780*482*220mm
Etiquetas: integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
Tecnología de Producción: The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
Desafío de Diseño: The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
Investigación: In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
Inspiración: It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
Duración del Proyecto: The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
Flujo de Operación: UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.