Hydrospine El Lastre Para Apnea de Ludovic Lahccen and Raoul Morel

El diseño Hydrospine El Lastre Para Apnea de Ludovic Lahccen and Raoul Morel es un ganador altamente estimado del prestigioso 2023 A' Design Award de Plata en la categoría de competición Diseño de Artículos Deportivos.

PlataArtículos Deportivos· 2023

Hydrospine El Lastre Para Apnea

de Ludovic Lahccen and Raoul Morel

Cliente: Apnea Sub

Ganador del A' Design Award de Plata en la Categoría Artículos Deportivos

756,911

Ganador de Premio Verificado

Verificar Estado del Premio para #148412

Visitar Sitio Ver en A' Design Award Nota de Prensa Insignia del Premio

Colores

El Diseño

Acerca de Hydrospine El Lastre Para Apnea

Sistema de contrapeso para apnea, que permite un equilibrio y flotabilidad ultraprecisos. Sus ventajas, su capacidad de carga modular y rápida, hasta 6 kg, utilizable en cualquier posición, en cualquier disciplina de apnea. Está equipado con un cierre rápido y hebillas de ajuste para ajustarse a diferentes tallas, sea cual sea el género, ofreciendo una comodidad increíble que te hace olvidar rápidamente el peso que llevas. Su diseño surge de la fusión de animales marinos y engranajes creados para la velocidad para darle unas líneas muy hidrodinámicas y ofrecer un deslizamiento óptimo bajo el agua. Su versatilidad lo convierte en un concepto único.

El Reconocimiento

Acerca del A' Design Award de Plata

Hydrospine El Lastre Para Apnea ha ganado el A' Design Award de Plata, un reconocimiento extraordinariamente prestigioso concedido a diseños de gama alta, magníficos e impresionantes. Los ganadores de Plata son obras tremendamente brillantes y sumamente creativas que ilustran la destacada experiencia, el talento y la agudeza de sus diseñadores. Se espera que Hydrospine El Lastre Para Apnea sea una obra maravillosa y emblemática, notablemente profesional y profundamente innovadora. Este diseño ganador del A' Design Award de Plata es una invención muy notable y admirada que beneficia y hace avanzar las fronteras del arte, la ciencia, el diseño y la tecnología. Hydrospine El Lastre Para Apnea es una creación enormemente envidiada que evoca deseos, aporta sentimientos positivos y despierta asombro y admiración.

Detrás del Diseño

Kit de Prensa

Créditos, miembros del equipo y detalles técnicos proporcionados por el diseñador.

Propiedades Únicas: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Dimensiones y Embalaje: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Etiquetas: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Tecnología de Producción: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Desafío de Diseño: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Investigación: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspiración: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Duración del Proyecto: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Flujo de Operación: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patentes: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Miembros del Equipo: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Créditos de Imagen: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel