Vista EY2T Motorizita Biometria Identiga Kamerao de Chris Dopp & Travis Baldwin

La dizajno Vista EY2T Motorizita Biometria Identiga Kamerao de Chris Dopp & Travis Baldwin estas tre estimata gajninto de la prestiĝa 2015 Arĝenta A' Design Award en la Konkursa Kategorio Dezajno de Sekurecaj, Protektaj kaj Observaj Produktoj.

ArĝentoSekurecaj Produktoj· 2015

Vista EY2T Motorizita Biometria Identiga Kamerao

de Chris Dopp & Travis Baldwin

Kliento: Vista Imaging and Crea Inc Design LTD

Gajninto de Arĝenta A' Design Award en la Kategorio Sekurecaj Produktoj

25,961

Kontrolita Premiogajninto

Kontroli Premiostaton por #40052

Viziti Retejon Vidi ĉe A' Design Award Gazetara Komuniko Premia Insigno

Koloroj

La Dezajno

Pri Vista EY2T Motorizita Biometria Identiga Kamerao

Vista EY2T estas motorizita biometria identiga kamerao por irisa kaj vizaĝa rekonado. La aparato skanas la vidkampon por vizaĝoj, poste motoroj turnas la kameraon por celi al la okuloj. Larĝa disvastigo de infraruĝaj LED-oj kaj aŭtofokusa sistemo ebligas kapton je distanco de 3 ĝis 6 futoj, tiel ke mana celado ne necesas. Naŭ antaŭaj sensiloj estas unuigitaj malantaŭ unu sola nigra vizaĝo, kaj la cilindra pilforma strukturo kun rondigitaj finoj kreas trankvilan kaj nethreatan formon. La kamerao povas esti uzata sendepende aŭ kun mura muntilo.

La Agnosko

Pri la Arĝenta A' Design Award

Vista EY2T Motorizita Biometria Identiga Kamerao estas gajninto de la Arĝenta A' Design Award, grandege prestiĝa rekono donata al plejklasaj, belegaj kaj impresaj dezajnoj. La Arĝentaj gajnintoj estas treege brilaj kaj treege kreemaj verkoj, kiuj ilustras la elstaran sperton, talenton kaj sagacon de siaj dezajnistoj. Oni atendas, ke Vista EY2T Motorizita Biometria Identiga Kamerao estu mirinda, montrinda verko, kiu estas rimarkinde profesia kaj profunde nova. Ĉi tiu dezajno gajninta la Arĝentan A' Design Award estas tre rimarkinda, admirata inventaĵo, kiu profitigas kaj antaŭenigas la limojn de arto, scienco, dezajno kaj teknologio. Vista EY2T Motorizita Biometria Identiga Kamerao estas vaste enviata kreaĵo, kiu vekas dezirojn, alportas pozitivajn sentojn kaj ekbrilas miron kaj mirigon.

Malantaŭ la Dezajno

Gazetara Dosiero

Kreditoj, teamanoj kaj teknikaj detaloj provizitaj de la dezajnisto.

Unikaj Ecoj: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Dimensioj kaj Pakado: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Etikedoj: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Produkta Teknologio: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Dizajna Defio: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Esplorado: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inspiro: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Projekta Daŭro: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Funkcia Fluo: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Teamanoj: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Bildaj Kreditoj: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015