Airwood Drona Konstruilaro de Uavi Technology

La dizajno Airwood Drona Konstruilaro de Uavi Technology estas tre estimata gajninto de la prestiĝa 2020 Fera A' Design Award en la Konkursa Kategorio Dezajno de Ludiloj, Ludoj kaj Ŝatokupaj Produktoj.

FeroLudiloj· 2020

Airwood Drona Konstruilaro

de Uavi Technology

Kliento: UAVI Technology (Shen Zhen) Limited

Gajninto de Fera A' Design Award en la Kategorio Ludiloj

17,987

Kontrolita Premiogajninto

Kontroli Premiostaton por #103852

Viziti Retejon Vidi ĉe A' Design Award Gazetara Komuniko Premia Insigno

Koloroj

La Dezajno

Pri Airwood Drona Konstruilaro

Airwood estas kunmetebla drona konstruilaro desegnita por infanoj kaj plenkreskuloj. La kvarakspa droneo uzas kadron faritan el kunmetita tilia lignoplato, tranĉita en maldikajn du-milimetrajn pecojn per lasertranĉilo. Uzantoj kunmetas la lignoplatojn kaj la elektronikajn partojn permane por konstrui kaj la droneon kaj la teleregilon. Modulaj regiloj, motoroj kaj bateriaj ebligas krei plurajn kadrojn kaj aspektojn el unu aro. La droneo subtenas endoman ŝvebadon, aeran fotadon kaj grafikan programadon. La atestita ligno malpliigas la uzadon de plasto kaj metalo.

La Agnosko

Pri la Fera A' Design Award

Airwood Drona Konstruilaro estas gajninto de la Fera A' Design Award, prestiĝa rekono donata al bonaj dezajnoj, kiuj plenumas la profesiajn kaj industriajn postulojn atendatajn de bone dezajnitaj kreaĵoj. La Feraj gajnintoj montras grandan lertecon, altan specialiĝon, spertan komprenon kaj kreivan kapablon de siaj kreintoj. Oni atendas, ke Airwood Drona Konstruilaro estu tre estimata, admirata kaj ŝatata kreaĵo, kiu estas praktika kaj nova. Ĉi tiu dezajno gajninta la Feran A' Design Award integras plej bonajn industriajn praktikojn kaj havas kompetentajn teknikajn karakterizojn ligitajn kun scipovo kaj talento. Airwood Drona Konstruilaro estas respektata pro sia zorgemo kaj estas dezajnita por provizi plibonigojn de la vivokvalito, kiuj helpas fari la mondon pli bona loko.

Malantaŭ la Dezajno

Gazetara Dosiero

Kreditoj, teamanoj kaj teknikaj detaloj provizitaj de la dezajnisto.

Unikaj Ecoj: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Dimensioj kaj Pakado: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Etikedoj: Drone, Wood, DIY, Modularity, Programmable
Produkta Teknologio: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Dizajna Defio: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Esplorado: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspiro: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Projekta Daŭro: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Funkcia Fluo: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Patentoj: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Bildaj Kreditoj: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.