DefeXtiles Tekstilfremstillingsteknik af Jack Forman er en højt anset vinder af den meget prestigefyldte 2021 A' Design Award i Bronze i konkurrencekategorien 3D-printede Former og Produkter Design.
Bronze3D-print· 2021
DefeXtiles Tekstilfremstillingsteknik
af Jack Forman
Klient: Tangible Media Group, MIT Media Lab
Vinder af A' Design Award i Bronze i kategorien 3D-print
Verificeret Prisvinder
Verificer Prisstatus for #112633Designet
Om DefeXtiles Tekstilfremstillingsteknik
Book Text: DefeXtiles er en teknik til fremstilling af tynde, fleksible tekstiler på almindelige 3D-printere. Metoden styrer underekstrudering, så der dannes små klumper med fine tråde imellem sig. De resulterende periodiske huller giver det printede stof et tekstillignende udseende, åndbarhed, fleksibilitet og stræk, selv med stive materialer såsom polylactic acid (PLA). Tekstilerne printes vinkelret på printpladen, så der kan skabes plisserede og buede former. Anvendelsesområder omfatter beklædning, håndgribelige grænseflader og fjerbolde. Ledende filament kan indlejre kredsløbsspor i stoffet.
Anerkendelsen
Om A' Design Award i Bronze
DefeXtiles Tekstilfremstillingsteknik er vinder af A' Design Award i Bronze, en højt prestigefyldt anerkendelse, der tildeles enestående designs, som udmærker sig ved kreativitet, opfindsomhed og skarpsindighed. Bronzevinderne er rigeligt dygtige og påfaldende kreative artefakter, der bekræfter deres designeres store erfaring, fantasi og snilde. DefeXtiles Tekstilfremstillingsteknik forventes at være en højt estimeret, beundret og kær genstand, der er bemærkelsesværdigt professionel og innovativ. Dette design, der har vundet A' Design Award i Bronze, indarbejder bedste praksis inden for kunst, videnskab, design og teknologi og er fremragende på grund af sin sans for detaljer. DefeXtiles Tekstilfremstillingsteknik tilfredsstiller pragtfuldt behov, rører længsler, charmerer følelser og appellerer til nysgerrigheden.
Bag Designet
Pressemappe
Credits, teammedlemmer og tekniske detaljer leveret af designeren.
- Unikke Egenskaber
- DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
- Tags
- textile, 3d print, lace, advanced manufacturing, fabric
- Produktionsteknologi
- In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
- Designudfordring
- To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
- Forskning
- We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
- Inspiration
- For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
- Projektvarighed
- Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
- Driftsflow
- This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
- Teammedlemmer
- Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii
Sponsoreret
Udforsk Udover Designers.org
Opdag produkter, tjenester og muligheder fra vores annoncepartnere.
Mere at Udforske
Relaterede Design
Udforsk flere prisvindende design fra samme kategori, udvalgt efter fortjeneste.
