Vista EY2T Motorized Biometric Identification Camera ni Chris Dopp & Travis Baldwin

Ang disenyo nga Vista EY2T Motorized Biometric Identification Camera ni Chris Dopp & Travis Baldwin usa ka labihan ka tinahod nga mananaog sa prestihiyosong 2015 A' Design Award nga Pilak sa Kategoriya sa Kompetisyon sa Disenyo sa Produkto sa Seguridad, Kaluwasan ug Pagbantay.

PilakProdukto sa Seguridad· 2015

Vista EY2T Motorized Biometric Identification Camera

ni Chris Dopp & Travis Baldwin

Kliyente: Vista Imaging and Crea Inc Design LTD

Mananaog sa A' Design Award nga Pilak sa Kategoriya sa Produkto sa Seguridad

25,961

Gi-verify nga Mananaog sa Ganti

Pamatuod sa Kahimtang sa Ganti alang sa #40052

Bisitaha ang Site Tan-awa sa A' Design Award Press Release Badge sa Ganti

Mga Kolor

Ang Disenyo

Bahin sa Vista EY2T Motorized Biometric Identification Camera

Ang Vista EY2T usa ka motorized biometric identification camera para sa iris ug facial recognition. Ang device nag-scan sa field of view aron makakita og mga nawong, unya ang mga motor moliso sa camera aron mag-focus sa mga mata. Ang halapad nga pagkatag sa infrared LEDs ug usa ka autofocus system nagtugot sa pagkuha og imahen gikan sa distansya nga 3 hangtod 6 ka piye, mao nga wala na kinahanglana ang manual nga pag-aim. Siyam ka atubangang sensor ang gihiusa sa likod sa usa ka itom nga nawong, ug ang cylindrical nga porma nga daw pildoras nga adunay lingin nga mga tumoy naghatag og kalma ug dili makahadlok nga panagway. Ang camera mahimong gamiton nga standalone o uban sa wall mount.

Ang Pag-ila

Bahin sa A' Design Award nga Pilak

Vista EY2T Motorized Biometric Identification Camera usa ka mananaog sa A' Design Award nga Pilak, usa ka talagsaon kaayo nga prestihiyoso nga pag-ila nga gihatag sa labing taas nga lebel, matahom, ug makadani nga mga disenyo. Ang mga mananaog sa Pilak labihan ka hayag ug mamugnaon nga mga buhat nga nagpakita sa bantogan nga kahanas, talento, ug kamatngon sa ilang mga tigdesinyo. Gilauman nga ang Vista EY2T Motorized Biometric Identification Camera mahimong talagsaon nga buhat nga ipasigarbo, dako ang pagkapropesyonal ug lawom ang kabag-ohan. Kini nga disenyo nga nakadaog og A' Design Award nga Pilak usa ka labihan ka mamatikdan, gihangaan nga imbento nga mapuslanon ug nagpalapad sa mga utlanan sa arte, siyensya, disenyo, ug teknolohiya. Vista EY2T Motorized Biometric Identification Camera usa ka paglalang nga giinggit sa daghan, nga nagpukaw og mga tinguha, nagdala og positibo nga mga pagbati, ug nagsiga sa katingala ug paghangyo.

Luyo sa Disenyo

Press Kit

Mga kredito, mga miyembro sa team ug teknikal nga mga detalye nga gihatag sa tigdisenyo.

Talagsaong mga Kinaiya: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Gidak-on ug Pakete: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Mga Tag: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Teknolohiya sa Produksyon: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Hagit sa Disenyo: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Panukiduki: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inspirasyon: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Gidugayon sa Proyekto: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Daloy sa Operasyon: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Mga Miyembro sa Team: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Mga Credit sa Imahen: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015