Dundas Square Barbers Sulod sa Barbershop ni Nivek Remas

Ang disenyo nga Dundas Square Barbers Sulod sa Barbershop ni Nivek Remas usa ka labihan ka tinahod nga mananaog sa prestihiyosong 2021 A' Design Award nga Puthaw sa Kategoriya sa Kompetisyon sa Disenyo sa Espasyong Interyor ug Eksibisyon.

PuthawInteryor· 2021

Dundas Square Barbers Sulod sa Barbershop

ni Nivek Remas

Mananaog sa A' Design Award nga Puthaw sa Kategoriya sa Interyor

24,899

Gi-verify nga Mananaog sa Ganti

Pamatuod sa Kahimtang sa Ganti alang sa #119896

Bisitaha ang Site Tan-awa sa A' Design Award Press Release Badge sa Ganti

Mga Kolor

Ang Disenyo

Bahin sa Dundas Square Barbers Sulod sa Barbershop

Ang Dundas Square Barbers usa ka disenyo sa sulod sa barbershop nga nahimutang sa Dundas Square sa Toronto, Canada. Ang disenyo naghubad pag-usab sa klasikong mga detalye sa barbershop sulod sa gamay nga luna nga 850 ka square feet. Tungod kay ang lugar dili motugot sa tradisyonal nga wall molding, gigamit ang custom nga mga moulding nga hinimo sa gaan nga foam core diha sa kisame ug sa ibabaw nga dado. Ang salog adunay radial nga sumbanan nga nagpahinumdom sa mga guhit sa tradisyonal nga barber pole. Ang mga floating work station gihan-ay libot sa mga haligi nga adunay salamin. Ang mga arko sa salamin nga ombre ug ang wall covering nagpalapad sa panan-aw lapas sa pangunang lawak.

Ang Pag-ila

Bahin sa A' Design Award nga Puthaw

Dundas Square Barbers Sulod sa Barbershop usa ka mananaog sa A' Design Award nga Puthaw, usa ka dungganon nga pag-ila nga gihatag sa maayong mga disenyo nga nakatagbo sa propesyonal ug industriyal nga mga gikinahanglan nga gipaabot gikan sa maayo ang pagkadisenyo nga mga paglalang. Ang mga mananaog sa Puthaw nagpakita og dakong kahanas, taas nga espesyalisasyon, eksperto nga pagsabot, ug mamugnaon nga abilidad sa ilang mga tiglalang. Gilauman nga ang Dundas Square Barbers Sulod sa Barbershop mahimong gipabilhan, gihangaan, ug gihigugma nga paglalang nga praktikal ug bag-o. Kini nga disenyo nga nakadaog og A' Design Award nga Puthaw naghiusa sa labing maayong mga praktis sa industriya ug adunay hanas nga teknikal nga mga kinaiya nga nalambigit sa kahibalo ug talento. Dundas Square Barbers Sulod sa Barbershop gitahod tungod sa pagkamaabtik niini ug gidisenyo aron maghatag og mga pagpaayo sa kalidad sa kinabuhi nga makatabang sa paghimo sa kalibutan nga mas maayong dapit.

Luyo sa Disenyo

Press Kit

Mga kredito, mga miyembro sa team ug teknikal nga mga detalye nga gihatag sa tigdisenyo.

Talagsaong mga Kinaiya: Spilling directly onto Toronto’s Dundas Square, this unique and highly coveted location was acquired by our client to build the dream barbershop he always imagined of having since the beginning of his career.

The client was particularly drawn towards a more classic barber shop with heavy molding and historical renovated projects. Because the site didn’t allow for traditional applications of molding, NR was challenged to reimagine the molding design on the ceiling and upper dado in the main space rather than the walls. The client also wanted a memorable flooring design that could be seen from across Dundas Square. Using the mirror columns as a base-point, a radial pattern was created as a reference to the classic barber pole stripes.

Studying numerous barber shop precedents with static stations around the perimeter, NR created floating stations around mirror columns to create a more dynamic environment. As the space was only 850 sq.ft, ombre mirror and wall covering was utilized for the back room and archways to draw the user’s eye beyond the main space and visually enlarge and layer upon the design of the main room.
Gidak-on ug Pakete: Ombre mirror archways; size: 3275h x 1650w x 12mm thick.
moulding; 350mm x 3000mm L pieces; 3 types of moulding profiles; EPS foam core construction, mesh layer, plaster/concrete with paint finish.
Metal archways - 6mm thk. SS metal, 3 pieces buttjoint, pressure fit with construction adhesive.
Kevin Chan
Samer Shaath
Teknolohiya sa Produksyon: Ceiling & upper dado mouldings - traditional moulding of particle board substrate proved to be too heavy and cost prohibitive. NR found a local company, Mouldex Mouldings, who creates custom mouldings from EPS foam core. This allowed for a much less heavy moulding, which was more cost effective and easier to install.

The custom ombre wallpaper and mirror required the most trial and error in the project. We developed the PNG file with the wallpaper company (Metro Wallcovering), who produced a number of samples which we eventually approved based on texture and colouration. The digital file then went to the mirror company (Accura Glass) who took the digital file to produce the custom ombre mirror which is the ombre film sandwiched between a low iron glass front, and mirror back panel. The mirror panels were then produced and cut to site verified measurements in order to fit perfectly into the stainless steel archways.

Realization Technology:
Google Sketchup for 3D rendering
Hagit sa Disenyo: The challenges faced in this project were less to do with the creative and research portion but rather that we were executing the design during COVID. Construction delays due to additional health implementations/restrictions, lockdowns, increased importation lead-times and construction material shortages led to many challenges that the team had to adapt to on a daily basis. Coordination between consultants also proved to be more challenging as all coordination moved to be digital and online.
Panukiduki: Type of Research: precedents research of designed barber shops around the world
Research Objectives: aesthetics, layout/planning, functional requirements, lighting requirements
Methodology: N/A
Data Collection & Research Tools Used: Primary research - the client’s other barber shop location; secondary research: online articles and image search (Google and Pinterest)
Participants of Experiments: the client and partners of his other Barber Shop
Results: using stereotypical visual cues of a traditional barber shop (heavy moulding, barber shop pole stripes, etc) and applying it in a new way. Also, creating a completely unique, surrealistic, and experiential space to draw in foot traffic and new clientele
Insights and Impacts:
Effects of the Research in Real-Life Phenomena (such as Business, Society and Design): TBD (as we’re still in lockdown, the effects of our research will be determined once the Barber SHop is open and operational)
Inspirasyon: Spilling directly onto Toronto’s Dundas Square, this unique and highly coveted location was acquired by our client to build the dream barbershop he always imagined of having since the beginning of his career.

The client was particularly drawn towards a more classic barber shop with heavy molding and historical renovated projects. Because the site didn’t allow for traditional applications of molding, NR was challenged to reimagine the molding design on the ceiling and upper dado in the main space rather than the walls. The client also wanted a memorable flooring design that could be seen from across Dundas Square. Using the mirror columns as a base-point, a radial pattern was created as a reference to the classic barber pole stripes.
Gidugayon sa Proyekto: Q1-Q4 2020 (extended project duration due to COVID); location: Dundas Square, Toronto, Canada
Daloy sa Operasyon: *see project description about traditional vs DSB’s station positioning - static vs dynamic environment*
Mga Patente: Copyrights: NIVEK REMAS, 2020.
Mga Miyembro sa Team: Kevin Chan
Samer Shaath
Mga Credit sa Imahen: (Photographer Scott Norsworthy, NR-Dundas Square Barbers, 2020)