Ang disenyo nga Airwood Drone Kit ni Uavi Technology usa ka labihan ka tinahod nga mananaog sa prestihiyosong 2020 A' Design Award nga Puthaw sa Kategoriya sa Kompetisyon sa Disenyo sa Dulaan, Dula ug Produkto sa Libangan.

PuthawDulaan· 2020

Airwood Drone Kit

ni Uavi Technology

Kliyente: UAVI Technology (Shen Zhen) Limited

Mananaog sa A' Design Award nga Puthaw sa Kategoriya sa Dulaan

17,987

Gi-verify nga Mananaog sa Ganti

Pamatuod sa Kahimtang sa Ganti alang sa #103852

Bisitaha ang Site Tan-awa sa A' Design Award Press Release Badge sa Ganti

Mga Kolor

Ang Disenyo

Bahin sa Airwood Drone Kit

Ang Airwood usa ka drone kit nga tigumon nga gidisenyo alang sa mga bata ug hamtong. Ang upat-ka-axis nga drone naggamit og frame nga hinimo gikan sa composite basswood board, giputol ngadto sa nipis nga duha-ka-milimetros nga mga piraso pinaagi sa laser cutter. Ang mga tiggamit magtigom sa mga wood board ug sa electronic nga mga bahin gamit ang kamot aron matukod ang drone ug ang remote control. Ang modular nga mga controller, motor, ug baterya nagtugot sa paghimo og daghang klase sa frame ug hitsura gikan sa usa lang ka set. Ang drone makasuporta sa indoor hovering, aerial photography, ug graphical programming. Ang sertipikadong kahoy nagpakunhod sa paggamit og plastik ug metal.

Ang Pag-ila

Bahin sa A' Design Award nga Puthaw

Airwood Drone Kit usa ka mananaog sa A' Design Award nga Puthaw, usa ka dungganon nga pag-ila nga gihatag sa maayong mga disenyo nga nakatagbo sa propesyonal ug industriyal nga mga gikinahanglan nga gipaabot gikan sa maayo ang pagkadisenyo nga mga paglalang. Ang mga mananaog sa Puthaw nagpakita og dakong kahanas, taas nga espesyalisasyon, eksperto nga pagsabot, ug mamugnaon nga abilidad sa ilang mga tiglalang. Gilauman nga ang Airwood Drone Kit mahimong gipabilhan, gihangaan, ug gihigugma nga paglalang nga praktikal ug bag-o. Kini nga disenyo nga nakadaog og A' Design Award nga Puthaw naghiusa sa labing maayong mga praktis sa industriya ug adunay hanas nga teknikal nga mga kinaiya nga nalambigit sa kahibalo ug talento. Airwood Drone Kit gitahod tungod sa pagkamaabtik niini ug gidisenyo aron maghatag og mga pagpaayo sa kalidad sa kinabuhi nga makatabang sa paghimo sa kalibutan nga mas maayong dapit.

Luyo sa Disenyo

Press Kit

Mga kredito, mga miyembro sa team ug teknikal nga mga detalye nga gihatag sa tigdisenyo.

Talagsaong mga Kinaiya: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Gidak-on ug Pakete: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Mga Tag: Drone, Wood, DIY, Modularity, Programmable
Teknolohiya sa Produksyon: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Hagit sa Disenyo: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Panukiduki: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspirasyon: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Gidugayon sa Proyekto: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Daloy sa Operasyon: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Mga Patente: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Mga Credit sa Imahen: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.