Dizajn Ydin Stool Stolica od dizajnera Franck Divay je visoko cijenjeni dobitnik prestižne nagrade 2014 Srebrna nagrada A' Design Award u kategoriji Dizajn Namještaja.

SrebroNamještaj· 2014

Ydin Stool Stolica

autor Franck Divay

Klijent: Inoow Design

Dobitnik nagrade Srebrna nagrada A' Design Award u kategoriji Namještaj

44,838

Verificirani dobitnik nagrade

Verificirajte status nagrade za #30329

Posjetite stranicu Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Ydin Stool Stolica

Ydin stolicu možete montirati sami, bez korištenja posebnih alata, zahvaljujući jednostavnom sustavu za blokiranje. 4 identična stopala nisu postavljena ni po jednom redoslijedu, a betonsko sjedište, koje djeluje kao kamen temeljac, zadržava sve na svom mjestu. Stopala su izrađena od drveta otpada koji dolazi od proizvođača stepenica, lako se obrađuje korištenjem tradicionalnih tehnika drvne obrade i na kraju uljom. Sjedalo je jednostavno oblikovano u trajni UHP beton ojačan vlaknima. Samo 5 dijelova koji se mogu razdvojiti i koji su spremni za isporuku krajnjim kupcima je još jedan argument održivosti.

Priznanje

O nagradi Srebrna nagrada A' Design Award

Ydin Stool Stolica je pobjednik Srebrne nagrade A' Design Award, izuzetno prestižnog priznanja koje se dodjeljuje vrhunskim, veličanstvenim i impresivnim dizajnima. Srebrni pobjednici iznimno su briljantna i vrlo kreativna djela koja ilustriraju izuzetnu stručnost, talent i oštroumnost svojih dizajnera. Očekuje se da Ydin Stool Stolica bude divno, reprezentativno djelo koje je izuzetno profesionalno i duboko inovativno. Ovaj dizajn koji je osvojio Srebrnu nagradu A' Design Award vrlo je zapažen, nadaleko cijenjen izum koji koristi i pomjera granice umjetnosti, nauke, dizajna i tehnologije. Ydin Stool Stolica je kreacija kojoj se mnogi dive i zavide, koja budi želje, donosi pozitivne osjećaje i raspiruje čuđenje i divljenje.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Ydin stool can be mounted without using special tools, thanks to a simple interlocking system. The 4 identical feet are placed in no particular order and the concrete seat, acting as the keystone, keeps everything in place. Easily machined feet are made with scrap wood coming from a stairs manufacturer and finally oiled. The seat is moulded in a lasting fiber-reinforced concrete. Only 5 dissociable parts to be flat packed and ready to be shipped, is another sustainability argument.
Dimenzije i pakovanje: Product dimension : 310 x 310 x 440 mm
Product weight : 5,3 kg
Oznake: stool, furniture, wood, concrete, scandinavian, moulding, flatpack, interlocking, sustainable, seating,
Tehnologija proizvodnje: For a good fitting assembly, the hole dimensions in the center of the seat had to be extremely precise. So the mould has been made by using a 3D printed model. Then, the concrete seat remains raw from mold release. Feet are made with traditional woodworking technique by using several jigs or machining setups. With only 1 kind of piece to be shaped, it gives a very good process optimization when you start to manufacture several units. Scrap wood is the only raw material used for making them.
Dizajnerski izazov: The biggest challenge has been the technical and formal assembly development. The positioning of the 4 wooden feet one to each other, first. And secondly, the base interlocking into the seat. While having to meet the production capacities of a craft workshop.
Istraživanje: Project started with the desire to work with Ultra High Performance Concrete (UHPC), without knowing what kind of product was going to be obtained in the end. Soon, the choice to combine concrete with wood seemed to be the way not to get a single monobloc object that could just have been in molded plastic. Technical characteristics offered by this concrete, have allowed to develop an assembly principle that would not be possible to achieve with other materials, in a craftsmanship context.
Inspiracija: The idea of a stool comes by experimenting with Ultra High Performance Concrete (UHPC) moulding possibilities. The final drawing of the furniture has been inspired by Scandinavian design culture.
Trajanje projekta: The stool development was spread over two years, but not as a full-time job. This is an internal project that came to life between the requests performed to several customers.
Tok rada: With the fitting mounting system of the Ydin stool, the disadvantages of a furniture kit are deleted. No hardware need that requires the use of tools. Feet nesting is carried in an instinctive way without the need for a manual. The assembly principle is idealized in the middle of the seat and participates in the overall aesthetics of the piece of furniture.