Dizajn Trinity Čaša za piće od dizajnera Ivilina Miteva je visoko cijenjeni dobitnik prestižne nagrade 2026 Željezna nagrada A' Design Award u kategoriji Dizajn Posuda za Pečenje, Stolnog Posuđa, Posuđa za Piće i Posuđa za Kuhanje.

ŽeljezoKuhinjski Pribor· 2026

Trinity Čaša za piće

autor Ivilina Miteva

Klijent: Ivilina Miteva

Dobitnik nagrade Željezna nagrada A' Design Award u kategoriji Kuhinjski Pribor

111,022

Verificirani dobitnik nagrade

Verificirajte status nagrade za #182123

Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Trinity Čaša za piće

Trinity je savremena kolekcija staklenog posuđa koja redefiniše čašu za piće kroz reverzibilni dizajn. Svaki od tri komada funkcioniše u dvije orijentacije, nudeći različite zapremine i iskustva unutar jedne forme. Njegova minimalistička geometrija uklanja razliku između dna i ruba, omogućavajući korisnicima da redefinišu funkciju jednostavnim pokretom. Izrađen od izdržljivog, recikliranog borosilikatnog stakla, Trinity spaja održivost sa preciznošću, što rezultira profinjenim, ali razigranim dizajnom koji podstiče interakciju.

Priznanje

O nagradi Željezna nagrada A' Design Award

Trinity Čaša za piće je pobjednik Željezne nagrade A' Design Award, prestižnog priznanja koje se dodjeljuje dobrim dizajnima što ispunjavaju profesionalne i industrijske zahtjeve očekivane od dobro dizajniranih kreacija. Željezni pobjednici pokazuju veliku vještinu, visoku specijalizaciju, stručno razumijevanje i kreativne kapacitete svojih stvaralaca. Očekuje se da Trinity Čaša za piće bude visoko cijenjena, voljena i njegovana kreacija koja je praktična i inovativna. Ovaj dizajn koji je osvojio Željeznu nagradu A' Design Award integrira najbolje industrijske prakse i ima kompetentne tehničke karakteristike povezane sa znanjem i talentom. Trinity Čaša za piće se poštuje zbog svoje temeljitosti i dizajniran je da pruži poboljšanja kvaliteta života koja pomažu da svijet postane bolje mjesto.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Three sizes for various occasions. This set consists of three visually identical glasses with different volumes. The rigid geometry of the shape is enriched not only by colors, but also by tongue-in-cheek evocative design, making these glasses a valued addition to any bar or household. The different volumes of the "stool" half call to be filled with various drinks.
Dimenzije i pakovanje: Trinity S: Content 200/200ml, Diameter 103/64mm, Height 130mm
Trinity M: Content 200/300ml, Diameter 103/64mm, Height 160 mm
Trinity L: Content 200/380ml, Diameter 103/64mm, Height 190mm
Oznake: tableware, drinkware, glassware, drinking glass, tumbler, glass, borosilicate
Tehnologija proizvodnje: The Trinity glassware series is made from borosilicate glass, known for its durability and resistance to hot and cold temperature. The glass can be molded and crafted in a variety of thicknesses. It is an infinitely recyclable material that can be re-melted again and again, minimizing waste and environmental impact.
Dizajnerski izazov: The primary creative challenge was reconciling reversibility with ergonomic and structural integrity. Designing a glass that performs equally well in two orientations required eliminating the conventional hierarchy between base and rim, while maintaining stability, comfort and visual balance.
Istraživanje: The research question centered on whether a single glass form could successfully operate in two orientations without compromising stability, ergonomics, or aesthetic coherence. Material research focused on the properties of borosilicate glass - thermal resistance, weight reduction potential, and tensile strength - allowing exploration of refined wall thickness while maintaining durability.
Inspiracija: The project started for the 2024 Traga Open Call. This Drinkware collection originates from the concept of double-use glasses, objects capable of shifting function through inversion. The three glasses are conceived as reversible forms. Each piece is designed to function in two orientations, allowing variations in volume, proportion, and drinking experience. By simply turning the object, the user redefines its purpose.
Trajanje projekta: The project was initiated in 2024, in response to the Traga Open Call. Concept development began with research into reversible drinkware and functional double-use systems.
Tok rada: The user intuitively explores both ends of the glass, discovering distinct rim diameters and capacities. The act of turning the glass becomes a part of the ritual. Flow is guided by calibrated geometry. Rim thickness is optimized for comfort and controlled liquid delivery, while curvature directs the beverage smoothly toward the lip.