Openwear Komplet za Izradu Prototipova Nosive Elektronike od Leijing Zhou

Dizajn Openwear Komplet za Izradu Prototipova Nosive Elektronike od dizajnera Leijing Zhou je visoko cijenjeni dobitnik prestižne nagrade 2024 Željezna nagrada A' Design Award u kategoriji Inženjering Proizvoda i Tehnički Dizajn.

ŽeljezoInženjering· 2024

Openwear Komplet za Izradu Prototipova Nosive Elektronike

autor Leijing Zhou

Klijent: Zhejiang University

Dobitnik nagrade Željezna nagrada A' Design Award u kategoriji Inženjering

53,846

Verificirani dobitnik nagrade

Verificirajte status nagrade za #159003

Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Openwear Komplet za Izradu Prototipova Nosive Elektronike

Openwear je komplet alata za brzu izradu prototipova nosive elektronike. Komplet uključuje modifikovanu Lilypad USB razvojnu ploču, jedanaest novodizajniranih modula i kablove za brzo povezivanje. Svaki modul nosi ulazni ili izlazni čip i šest pinova promjera 3 mm. Magneti promjera 10 mm su fiksirani na poleđinu pločica, tako da se dijelovi pričvršćuju na odjeću putem magnetnih podloga umjesto šivanja. O-konektori i zavrtnji spajaju pinove. Prototipovi se mogu izraditi, testirati i rearanžirati direktno na tkanini.

Priznanje

O nagradi Željezna nagrada A' Design Award

Openwear Komplet za Izradu Prototipova Nosive Elektronike je pobjednik Željezne nagrade A' Design Award, prestižnog priznanja koje se dodjeljuje dobrim dizajnima što ispunjavaju profesionalne i industrijske zahtjeve očekivane od dobro dizajniranih kreacija. Željezni pobjednici pokazuju veliku vještinu, visoku specijalizaciju, stručno razumijevanje i kreativne kapacitete svojih stvaralaca. Očekuje se da Openwear Komplet za Izradu Prototipova Nosive Elektronike bude visoko cijenjena, voljena i njegovana kreacija koja je praktična i inovativna. Ovaj dizajn koji je osvojio Željeznu nagradu A' Design Award integrira najbolje industrijske prakse i ima kompetentne tehničke karakteristike povezane sa znanjem i talentom. Openwear Komplet za Izradu Prototipova Nosive Elektronike se poštuje zbog svoje temeljitosti i dizajniran je da pruži poboljšanja kvaliteta života koja pomažu da svijet postane bolje mjesto.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Openwear is a toolkit for building rapid wearable prototypes. It includes a modified Lilypad USB development board, 11 newly designed modules, and quick connecting cables. This kit facilitates rapid prototyping by enabling quick attachment and connection and allows users to directly build and test prototypes on the intended substrate like clothes.
Dimenzije i pakovanje: Development board size is ϕ50*1mm, module size is ϕ25*1mm.
Oznake: Hardware, Electronic, Toolkit, Wearable, E-textile
Tehnologija proizvodnje: For the modules, we have designed 11 different modules with input or output chips contained on each module. Each module has six 3mm diameter pins. For quick fixing, we fixed a 10mm diameter magnet on the bottom of the development board and modules, which works with the magnetic fixing pads to attach to clothes. For quick connects, we used O-connectors and bolts, which work well with the 3mm pin sizes on the PCB.
Dizajnerski izazov: The biggest challenge in the whole research was to achieve a rapid fixing and connection of the PCB. We tried a variety of methods including pins, buttons, velcro, and finally we chose to use magnets with O-connectors, which had not been used before.
Istraživanje: The success of the LilyPad has resulted in the creation of various development boards, such as the more compact TinyLily and the Circuit Playground with many sensors. However, these variations only modify the dimensions or integrate sensors, without modifying the Lilypad's method for constructing wearable circuits. This method presents a challenge in prototyping wearable circuits: sewing processes are time-consuming and set a high threshold for beginners. Furthermore, the troubleshooting process in wearable circuit prototyping often requires resetting and resewing. Once the development board is integrated into the fabric, the complexity of the debugging code also increases proportionally.
Inspiracija: Common wearable circuits often need to be fixed using sewing, which is very cumbersome. To solve this problem, we took inspiration from magnetic buttons. We have embedded magnets in the back of the PCB to fix it using magnetic force.
Trajanje projekta: The project started in August 2023 in Ningbo and finished in January 2024
Tok rada: 1. Building the First Circuit Prototype: Select modules based on design requirements and assemble them on a flat surface for initial circuit testing and debugging. 2. Continuous Testing and Adjustment of the Circuit: Reconfigure module positions on the body for testing purposes. 3. Building the Final Circuit: Sew components directly onto fabric using conductive yarn or utilize sewing magnet fixing pads as an alternative method. This ensures flexibility and ease of removal.
Članovi tima: Leijing Zhou
Xin An
Yiqing Zhang
Yang Mao