Праца Lasso Дэкаратыўны Тэкстыль аўтарства Cristina Orozco Cuevas з'яўляецца высокаацэненым лаўрэатам вельмі прэстыжнай узнагароды 2014 Бронзавая прэмія A' Design Award у катэгорыі конкурсу Дызайн тэкстылю, тканін, тэкстур, узораў і палатна.
БронзаТэкстыль· 2014
Lasso Дэкаратыўны Тэкстыль
Кліент: Cristina Orozco Cuevas Studio
Лаўрэат узнагароды Бронзавая прэмія A' Design Award у катэгорыі Тэкстыль
Верыфікаваны лаўрэат
Праверыць статус узнагароды для #30204Дызайн
Пра Lasso Дэкаратыўны Тэкстыль
Ласа як азначэнне - гэта доўгая вяроўка з бегавой пятлёй на адным канцы. Замест таго, каб натхняцца на; гэты тэкстыль з'яўляецца вынікам. Акрамя некаторых спецыяльных разбітых каналаў, ён мае асаблівы дотык і эстэтычнасць, таму святло можа праходзіць вельмі мякка. Ён напалову прамысловы - напалову апрацаваны, сплецены ў электронныя станкі і выразаны ўручную. Гэты праект з'яўляецца вельмі прывабным і захапляльным як цукеркі і стаў адной з галоўных праблем і адкрыццяў у маёй кар'еры тэкстыльнага дызайнера. Гэты праект - аб серэндыпіі, спатыканні, адкрыцці выпадкаў, шчасце і няшчасных выпадках.
Прызнанне
Пра Бронзавая прэмія A' Design Award
Lasso Дэкаратыўны Тэкстыль — пераможца Бронзавай прэміі A' Design Award, высокапрэстыжнага прызнання, якое прысуджаецца выдатным дызайнам, што вылучаюцца творчасцю, вынаходлівасцю і праніклівасцю. Бронзавыя пераможцы — гэта ўмелыя і ўражліва творчыя артэфакты, якія пацвярджаюць вялікі вопыт, уяўленне і знаходлівасць сваіх дызайнераў. Чакаецца, што Lasso Дэкаратыўны Тэкстыль — гэта высока цэнены, захапляльны і любімы прадмет, надзвычай прафесійны і інавацыйны. Гэты дызайн, што атрымаў Бронзавую прэмію A' Design Award, уключае лепшыя практыкі ў мастацтве, навуцы, дызайне і тэхналогіях і выдатны ўвагай да дэталей. Lasso Дэкаратыўны Тэкстыль цудоўна задавальняе патрэбы, кранае жаданні, зачароўвае пачуцці і ўзбуджае цікаўнасць.
За кулісамі дызайну
Прэс-кіт
Аўтарства, удзельнікі каманды і тэхнічныя дэталі, прадстаўленыя дызайнерам.
- Унікальныя ўласцівасці
- half industrial - half crafted, designed with textile CAD software, woven in jacquard electronic looms and cut by hand. It is woven industrially, but cut by hand which gives job to machines and external people. It forms vertical channels as a kind of fray where the light can pass through very sofltly. The frays are crafted processes and lasts months. A fabric with this kind of processes in the industry mills is nearly impossible but not that much.
- Памеры і ўпакоўка
- Widths available: 1.40 m and 2.80 m. Rapport repeat: 35 cm width x 25 cm height. Uses: lamps, pillows, bedscarfs and decorative curtains. As a finish ironing the loose fur brings more volume and the frayed channels are more obvious. It is of massive production and the loose yarns are strongly moored with a tafeta special weave union.
- Тэгі
- Jacquard, textile, decoration, fabric, lasso, half indusrtrial, half handmade, fur
- Тэхналогія вытворчасці
- All polyester dyed yarns woven in Jacquard electronic looms. The floated yarns are cut manually by a special tool we call knife shutter. The weave technique is very old (double fabric). However the important aspect is how I applied the weaves interlaced in order to be viable to be produced and not just as a prototype as good productivity performance. The special tool developed reminded textile engineers old techniques to make corduroy.
- Дызайнерскі выклік
- At the beginning the aim was to develop a fabric with square bags. It would have little bags to put inside tools or jewelry. After weaving and testing different techiques, this came up as a serendipity all of it. There were more than 10 previews designs to get to the final lasso fabric. The weaves interaction result was floats in warp and weft. To cut the yarns in vertical and horizontal, we developed a special tool that works as a long shuttle knife to have a better and faster production. It was an enormous challenge to have it accomplished as a product and to convince the mill that it would work.
- Даследаванне
- The research was completely experimental. Textile engineers were afraid that using this technique on industrial looms could not work, specially the machines weaving. The process of cutting the loose yarns was hard in order to bring a product that because of the hand crafted process would not be so expensive that would not work with the market prices. Besides the lead time to deliver a roll of this product within 3 weeks at least. Since warping process till the client's door. The cut part can be done by external workers so other people get a job.
- Натхненне
- I named it lasso as a long rope with a running noose at one end. This project can be described as: experimentation. This fabric started with the research of something very different from the result. More than inspiration this project is about having luck, stumbling upon, chance discovery, fortuity and accident. It is a piece of hard work, research, mulish and not withdraw.
- Працягласць праекта
- The project started in March, 2012 and ended in September, 2012.
- Аперацыйны працэс
- It has a special appearance as it seems as an extra application or embroidery upon the fabric but in fact it is woven like that. People always want to touch first than see the furry yarns. If there is light behind the soft feeling is quite special and light passes through the frayed parts. This kind of textile can replace goose feathers.
- Удзельнікі каманды
- Cristina Orozco Cuevas
Спансарскае
Даследуйце за межамі Designers.org
Адкрывайце прадукты, паслугі і магчымасці ад нашых рэкламных партнёраў.
Больш для агляду
Звязаныя дызайны
Аглядзіце больш узнагароджаных дызайнаў з той жа катэгорыі, адабраных па якасці.