التصميم Cr1 كرسي متحرك بواسطة Doug Garven هو فائز رفيع المستوى بالجائزة المرموقة جائزة A' Design Award الذهبية لعام 2024 في فئة المسابقة هندسة المنتجات والتصميم التقني.

ذهبالهندسة· 2024

Cr1 كرسي متحرك

بواسطة Doug Garven

العميل: Permobil

فائز بالجائزة جائزة A' Design Award الذهبية في فئة الهندسة

393,500

فائز بجائزة موثّقة

تحقّق من حالة الجائزة للتصميم رقم #156779

زيارة الموقع عرض في A' Design Award بيان صحفي شارة الجائزة

الألوان

التصميم

حول Cr1 كرسي متحرك

يعد CR1 كرسياً متحركاً مصنوعاً من ألياف الكربون وقابلاً للتخصيص بالكامل وفقاً للمواصفات والتفضيلات الفردية للمستخدم. تم تصميم الواجهة الأمامية الفريدة ذات الزاوية المزدوجة لتتبع خطوط جسم المستخدم، مما يسمح له بالاقتراب من الأجسام لتحسين إمكانية الوصول والقدرة على المناورة في المساحات الضيقة. تم تصميم المقطع الأنبوبي الانسيابي وتوجيهه لتحسين القوة وراحة المستخدم في المناطق الملامسة للجسم، وجمالياً لتعزيز الإحساس بالسرعة. توفر الواقيات الجانبية ثنائية الغرض الحماية للمستخدم بينما تعمل كعنصر إنشائي للدعم.

التقدير

حول جائزة A' Design Award الذهبية

Cr1 كرسي متحرك هو فائز بجائزة A' Design Award الذهبية، وهي تقدير رفيع المكانة للغاية يُمنح للتصاميم من الدرجة الأولى والرائعة والمتميزة. والفائزون بالذهبية هم إبداعات شديدة الابتكار وعالية الرؤية ومبهرة ببريقها، تعكس نبوغ مصمميها وحكمتهم وبراعتهم. ويُتوقع أن يكون Cr1 كرسي متحرك اختراعًا عظيم الإشادة ورائدًا وضخم الأثر يقدم قيمة غير مسبوقة. وهذا التصميم الفائز بجائزة A' Design Award الذهبية مشروع مذهل ومحترم يعود بالنفع الكبير ويوسّع حدود الفن والعلم والتصميم والتكنولوجيا. ويخلق Cr1 كرسي متحرك مشاعر رغبة قوية، ويثير الشغف، ويشجع الإبداع، ويفتننا.

خلف الكواليس

الملف الصحفي

الاعتمادات وأعضاء الفريق والتفاصيل التقنية المقدمة من المصمم.

الخصائص الفريدة: The CR1 is a custom fabricated carbon fiber wheelchair. Each one is unique and built around the user's individual body specifications and their desired preferences. Carbon fiber was selected not only for its performance benefits of strength and light weight, but also for the freedom to optimize the tube shape. The ovalized tubing is orientated at different angles along the frame to maximize strength and comfort for the user. The unique front-end design allows improved environmental access by allowing the user to get closer to objects.
الأبعاد والتغليف: Each chair is unique and based upon the information supplied by the user's order form which is 5 pages long and covers 9 specific measurements based upon the individual body proportions and chair set-up preferences. There are also numerous component and accessory options available to make each chair unique. The chair length dimensions are 330-483 mm, x 330-457 mm width, x 381-533 mm height.
الوسوم: everyday performance, ultralight, custom, made-to-order
تقنية الإنتاج: Production is through a vendor that specializes in the creation of carbon fiber products and their use of a proprietary foam core fabrication process that adds additional strength and helps to absorb vibrations. Their team was able to optimize the specific material layups and the fabrication methodology. Every frame consists of two mirrored sideframes that each have 3 bonded together sections of different angles and lengths, joined with a bonded crossbar. These modular components combine with others to make each chair unique and match the user's specifications. The design was refined through FEA analysis, user evaluation and finally, through mandated functionality and durability testing ANSI/RESNA, ISO 7176.
تحدي التصميم: The key challenges were improving accessibility and maneuverability while reducing the overall weight in a fully customizable product. We partnered with outside vendors to develop special components, like an entirely new style of caster fork bearing. Its creation allowed for smaller parts, lighter weight and a smaller footprint to the chair's design and overall proportions for improved maneuverability. Another key component was the ability to customize the frame designs in as economical and manufacturable method as possible that also minimized waste. The final realization of that was the modular, 3-section design to the sideframe. Different materials are utilized on different parts of the chair to maximize durability like titanium trim rings on the footrest for wear and SMC carbon reinforced parts for impact protection when the rear wheels are removed. The foam core of the carbon fiber parts improves strength and the perception of being too delicate and fragile a material for this application.
البحث: The background research for this project was inherent in over 30 years of being a professional wheelchair designer and user. This product was intended for advanced users who know how they want to sit and how they want their chair to feel and respond. The needs and requirements for this product are something that I live and experience every day. We also presented early prototypes to other users and industry experts for their opinions and feedback.
الإلهام: The CR1 was inspired by over 30 years as a product designer in the medical industry and as a chair user personally. I was given the task of creating the ultimate, daily-use chair and in doing so drew upon previous designs and what I would have liked to have done but wasn't able to either from a materials perspective or project parameters. The form is functionally driven but inspired by Formula 1 race cars and elements of the F-22 Raptor.
مدة المشروع: This project started in Nashville, TN in early 2018 and was officially completed and for sale on the market in October of 2023.
سير العمل: The CR1 is operated like any other manual wheelchair through the propulsion of the two drive wheels. What is improved over other devices in the market is how lightweight it is, the complete chair is only 6.8 kg and the increased maneuverability and accessibility through the kinked front-end design. The customized frame dimensions ensure a secure and comfortable fit for the user, much like a wheeled prosthetic.
براءات الاختراع: US 20230233387 A1
أعضاء الفريق: Jace Westcott