Aspen የትሪፖድ ራስ በ Colorado Tripod Company

Aspen የትሪፖድ ራስ በ Colorado Tripod Company የተሠራ ሲሆን በ የካሜራ እና የፎቶግራፊ መሣሪያ ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2021 A' Design Award የብር ሽልማት አሸናፊ ነው።

ብርየፎቶግራፊ መሣሪያ· 2021

Aspen የትሪፖድ ራስ

በ Colorado Tripod Company

ደንበኛ: Colorado Tripod Company

በ የፎቶግራፊ መሣሪያ ምድብ ውስጥ የ A' Design Award የብር ሽልማት አሸናፊ

39,753

የተረጋገጠ የሽልማት አሸናፊ

ለ #108315 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ Aspen የትሪፖድ ራስ

አስፐን የፎቶግራፍ ቅንብርን ለማቅለል የተነደፈ የትሪፖድ ራስ ነው። ክፍት ፍሬም የተያያዘ ካሜራ በሁለቱም አቅጣጫ ከ90 ዲግሪ በላይ እንዲዞር ያስችለዋል፣ ይህም ግዙፍ L-ብራኬቶች ሳያስፈልጉ በአግድም (landscape) እና በቁም (portrait) አቀማመጦች መካከል ፈጣን ለውጦችን ይሰጣል። ኳሱ ክብደትን የሚቀንሱ ጉድጓዶች ያሉት ባዶ ማዕከል ያለው ሲሆን ጥንካሬውን ግን ይጠብቃል። ተስተካካይ የሌቨር ማጣበቂያ ሰፊ የካሜራ ሳህኖችን ይይዛል፣ የግጭት መቆጣጠሪያ መጎተቻውን ያስቀምጣል፣ እና የፓኒንግ መቆለፊያ ለፓኖራሚክ ፎቶግራፎች ሙሉ ማዞርን ይፈቅዳል። አስፐን ከጠንካራ አኖዳይዝድ አልሙኒየም የተሠራ ነው።

እውቅናው

ስለ A' Design Award የብር ሽልማት

Aspen የትሪፖድ ራስ የA' Design Award የብር ሽልማት አሸናፊ ነው፤ ይህም ለምርጥ ደረጃ፣ ውብ እና አስደናቂ ዲዛይኖች የሚሰጥ ያልተለመደ ከፍተኛ ክብር ያለው እውቅና ነው። የብር አሸናፊዎች የዲዛይነሮቻቸውን የላቀ ልምድ፣ ተሰጥኦ እና ጥልቅ ማስተዋል የሚያሳዩ እጅግ ብሩህ እና እጅግ ፈጠራ የተሞላባቸው ሥራዎች ናቸው። Aspen የትሪፖድ ራስ እጅግ ሙያዊና ጥልቅ ፈጠራ የተሞላበት አስደናቂ ማሳያ ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብር ሽልማትን ያሸነፈ ዲዛይን የኪነ ጥበብ፣ የሳይንስ፣ የዲዛይን እና የቴክኖሎጂ ድንበሮችን የሚጠቅምና የሚያስፋፋ ትኩረት የሚስብ፣ የሚደነቅ ፈጠራ ነው። Aspen የትሪፖድ ራስ ፍላጎትን የሚቀሰቅስ፣ በጎ ስሜት የሚያመጣ እና መደነቅንና መገረምን የሚያቀጣጥል በብዙዎች የሚቀኑበት ፈጠራ ነው።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
ልኬቶች እና ማሸጊያ: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
መለያዎች: tripod head, ball head, camera support, tripod, photography accessory
የማምረቻ ቴክኖሎጂ: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
የዲዛይን ተግዳሮት: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
ምርምር: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
መነሳሻ: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
የፕሮጀክት ጊዜ: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
የሥራ ሂደት: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
የፈጠራ ባለቤትነት: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
የቡድን አባላት: Colorado Tripod Company