Spring na inhoud
Oak Konan Shinagawa Kantoorgebou deur Obayashi Corporation

Die ontwerp Oak Konan Shinagawa Kantoorgebou deur Obayashi Corporation is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2023 A' Design Award in Silwer in die Argitektuur-, Gebou- en Struktuurontwerp-kompetisiekategorie.


SilwerArgitektuur· 2023

Oak Konan Shinagawa Kantoorgebou

deur Obayashi Corporation

Kliënt: Obayashi-Shinseiwa Real Estate Corporation

Wenner van die A' Design Award in Silwer in die Argitektuur-kategorie

18,291

Geverifieerde Toekenningswenner

Verifieer Toekenningsstatus vir #149620

Kleure

Die Ontwerp

Oor Oak Konan Shinagawa Kantoorgebou

Oak Konan Shinagawa is 'n 12-verdieping kantoorgebou geleë naby die hawe in Tokio, Japan. Die wit traliewerk-agtige buiteraam is 'n buitenste dop van voorafgegote beton wat dien as beide struktuurraam en sonweringstoestel. Gekombineer met die staalkonstruksie van die kern, skep hierdie hibriede struktuur 'n kolomvrye kantoorruimte wat buigsame uitlegte moontlik maak. Die voorafgegote kolomme en balke word buite die terrein vervaardig en van bo af in posisie neergelaat, wat die werk op die terrein vereenvoudig. Die buitevensters sluit natuurlike ventilasie-eenhede in wat met 'n verwyderbare handvatsel oopmaak.

Die Erkenning

Oor die A' Design Award in Silwer

Oak Konan Shinagawa Kantoorgebou is 'n wenner van die A' Design Award in Silwer, 'n buitengewoon prestigieuse erkenning wat toegeken word aan topklas-, pragtige en indrukwekkende ontwerpe. Wenners in Silwer is geweldig briljante en uiters kreatiewe werke wat die uitstaande kundigheid, talent en skerpsinnigheid van hul ontwerpers illustreer. Daar word verwag dat Oak Konan Shinagawa Kantoorgebou 'n wonderlike vertoonstuk is wat merkwaardig professioneel en diepgaande innoverend is. Hierdie ontwerp wat die A' Design Award in Silwer gewen het, is 'n hoogs noemenswaardige, bewonderde uitvinding wat die grense van kuns, wetenskap, ontwerp en tegnologie bevoordeel en uitbrei. Oak Konan Shinagawa Kantoorgebou is 'n wyd beny skepping wat begeertes oproep, positiewe gevoelens bring en verbasing en verwondering wek.

Agter die Ontwerp

Persstel

Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.

Unieke Eienskappe
The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
Afmetings & Verpakking
[Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
Etikette
Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
Produksietegnologie
Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
Ontwerpuitdaging
Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
Navorsing
Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
Inspirasie
Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
Projekduur
The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
Bedryfsvloei
The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
Spanlede
Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
Beeldkrediete
Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022

Geborg

Verken Verder as Designers.org

Ontdek produkte, dienste en geleenthede van ons advertensiavennote.

Goeie Ontwerp Verdien Groot Erkenning

Die A' Design Award is 'n internasionale, beoordeelde bekroning vir goeie ontwerp. Neem deel aan die A' Design Award om die geleentheid te kry om meriete-erkenning te verdien, roem, aansien en publisiteit vir jou werk te verwerf. Nomineer jou werk vir die A' Design Award en ding mee vir die begeerde A' Design Prize.

Nomineer