Die ontwerp Mira Stoel deur Cemil Yavuz is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2021 A' Design Award in Yster in die Meubelontwerp-kompetisiekategorie.
YsterMeubels· 2021
Mira Stoel
deur Cemil Yavuz
Kliënt: Cemil Yavuz
Wenner van die A' Design Award in Yster in die Meubels-kategorie
Geverifieerde Toekenningswenner
Verifieer Toekenningsstatus vir #116467Die Ontwerp
Oor Mira Stoel
Mira is 'n stoel wat ontwerp is vir eet- en algemene sitgebruik. Die raamwerk is gemaak van drie sirkelvormige vlekvrye staalprofiele. Twee profiele word teen dieselfde hoek en in dieselfde rigting gebuig, terwyl die derde op 'n ander manier gebuig word. Stof-bedekte sit- en rugoppervlaktes word aan die raamwerk vasgeheg, en hoogte-verstelbare plastiekvoetjies voltooi die stoel. Mira is liggewig en kan rondom 'n tafel of op sy eie geplaas word. Die stoel kan gebruik word deur na links of na regs te leun. Mira word uitmekaargehaal verskeep, sodat gebruikers die stoel na uitpak kan opmonteer.
Die Erkenning
Oor die A' Design Award in Yster
Mira Stoel is 'n wenner van die A' Design Award in Yster, 'n prestigieuse erkenning wat toegeken word aan goeie ontwerpe wat voldoen aan die professionele en industriële vereistes wat van goed ontwerpte skeppings verwag word. Wenners in Yster toon groot vaardigheid, hoë spesialisasie, kundige begrip en die kreatiewe vermoë van hul skeppers. Daar word verwag dat Mira Stoel 'n hoog aangeskrewe, bewonderde en gekoesterde skepping is wat prakties en innoverend is. Hierdie ontwerp wat die A' Design Award in Yster gewen het, integreer die beste praktyke in die bedryf en het bekwame tegniese kenmerke gekoppel aan kundigheid en talent. Mira Stoel word gerespekteer vir sy deeglikheid en is ontwerp om verbeterings in lewensgehalte te bied wat help om die wêreld 'n beter plek te maak.
Agter die Ontwerp
Persstel
Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.
- Unieke Eienskappe
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Afmetings & Verpakking
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Etikette
- Bending, Metal Profile, Chair, Simple, Elegant
- Produksietegnologie
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Ontwerpuitdaging
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Navorsing
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Inspirasie
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Projekduur
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Bedryfsvloei
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
Geborg
Verken Verder as Designers.org
Ontdek produkte, dienste en geleenthede van ons advertensiavennote.
Meer om te Ontdek
Verwante Ontwerpe
Ontdek meer bekroonde ontwerpe uit dieselfde kategorie, gekies op meriete.
