DefeXtiles Tekstielvervaardigingstegniek deur Jack Forman

Die ontwerp DefeXtiles Tekstielvervaardigingstegniek deur Jack Forman is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2021 A' Design Award in Brons in die 3D-Gedrukte Vorms en Produkte Ontwerp-kompetisiekategorie.

Brons3D-Drukwerk· 2021

DefeXtiles Tekstielvervaardigingstegniek

deur Jack Forman

Kliënt: Tangible Media Group, MIT Media Lab

Wenner van die A' Design Award in Brons in die 3D-Drukwerk-kategorie

34,002

Geverifieerde Toekenningswenner

Verifieer Toekenningsstatus vir #112633

Besoek Webwerf Bekyk by A' Design Award Persverklaring Toekenningskenteken

Kleure

Die Ontwerp

Oor DefeXtiles Tekstielvervaardigingstegniek

DefeXtiles is 'n tegniek vir die vervaardiging van dun, buigsame tekstiele op standaard 3D-drukkers. Die metode beheer onder-ekstrusie sodat klein klontjies vorm met fyn drade tussen hulle. Die gevolglike periodieke gapings gee die gedrukte materiaal 'n tekstielagtige voorkoms, asemhalingsvermoë, buigsaamheid en rekbaarheid, selfs met rigiede materiale soos polielaktiensuur. Die tekstiele word loodreg op die drukbed gedruk, sodat geplooide en geboë vorms gemaak kan word. Toepassings sluit in klere, tasbare koppelvlakke en pluimballe. Geleidende filament kan stroombaanspore in die materiaal inbed.

Die Erkenning

Oor die A' Design Award in Brons

DefeXtiles Tekstielvervaardigingstegniek is 'n wenner van die A' Design Award in Brons, 'n hoogs prestigieuse erkenning wat toegeken word aan uitstaande ontwerpe wat gekenmerk word deur kreatiwiteit, vindingrykheid en skerpsinnigheid. Wenners in Brons is ruimskoots vaardige en opvallend kreatiewe artefakte wat die groot ervaring, verbeelding en vindingrykheid van hul ontwerpers bevestig. Daar word verwag dat DefeXtiles Tekstielvervaardigingstegniek 'n hoog aangeskrewe, bewonderde en gekoesterde voorwerp is wat merkwaardig professioneel en innoverend is. Hierdie ontwerp wat die A' Design Award in Brons gewen het, inkorporeer die beste praktyke in kuns, wetenskap, ontwerp en tegnologie en is uitstekend vanweë sy aandag aan detail. DefeXtiles Tekstielvervaardigingstegniek bevredig behoeftes pragtig, raak aan begeertes, bekoor gevoelens en spreek die nuuskierigheid aan.

Agter die Ontwerp

Persstel

Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.

Unieke Eienskappe: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Etikette: textile, 3d print, lace, advanced manufacturing, fabric
Produksietegnologie: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Ontwerpuitdaging: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Navorsing: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspirasie: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Projekduur: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Bedryfsvloei: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Spanlede: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii